1CH 12V Relay Module with/without Shell Adjustable Trigger Delay Circuit Timing Cycle On/Off Switch Relay

1CH 12V Relay Module with/without Shell Adjustable Trigger Delay Circuit Timing Cycle On/Off Switch Relay

$21.49 $20.49

Type: with shell

with shell
without shell

🟢 In Stock

Specifications:Product Name: 1CH Relay ModuleDimensions: 64.2mm*34.8mm*18.5mmRelay capacity: AC220V10A or DC30V10AQuiescent current: 20mA Working current: 50mAWorking voltage: 10~16VSignal voltage: 4V~20VService life: 100,000 timesWorking temperature: -40~85Features:1. New upgrades, simplifying complexity to meet...

✔️ WORLDWIDE FREE SHIPPING
✔️ 30 DAYS RETURN GUARANTEE
✔️ SECURE CHECKOUT

visamasteramerican expressgoogle paypaypal
Description

Specifications:

Product Name: 1CH Relay Module
Dimensions: 64.2mm*34.8mm*18.5mm

Relay capacity: AC220V10A or DC30V10A

Quiescent current: 20mA Working current: 50mA

Working voltage: 10~16V

Signal voltage: 4V~20V

Service life: 100,000 times

Working temperature: -40~85Ôäâ



Features:


1. New upgrades, simplifying complexity to meet customer needs

2. Increase the power supply anti-reverse connection function

3. The input and output are isolated by optocoupler to enhance the anti-interference ability. Power consumption:

4. Guaranteed stability, industrial grade circuit board, PLC-like

5. Setting parameters can be remembered forever after power off

6. The signal terminal can hold the voltage signal for a long time



Working Mode:


P1-1 working mode: the signal triggers the relay to pull in, the time is up, the relay is disconnected. The user can set the time T for the relay to pull in, press K2 once the hundredes digit digital tube starts to flash, press K3 at this time, the hundredes digit changes ;Press K2 and the ten-digit digital tube starts to flash, at this time press K3, the ten-digit number changes; press K2 one-digit digital tube starts to flash, press K3 at this time, the one-digit digital tube changes; press K2 again, ;digital The tube is no longer flashing, press K3 at this time, the decimal point is shifted, the decimal point in the one's place means 0 to 999 minutes, and the ten's place means 0 to 99.9 seconds without a decimal point means 0 to 999 seconds; after the selection is complete, the time setting is complete. Short press K1, you can enter the fine adjustment settings of the function, the trigger is invalid during the default delay, press K1 once, the trigger is valid during the delay (re-time), press K1, reset during the delay (time off, relay reset), Press again to repeat the default first setting.

   

P1-2 working mode: the signal triggers to start timing X time, and the relay pulls in Y and disconnects. The user can set the time 1X, Y for the relay to pull in; the time setting is similar to P1-1, except that the blue light is on to indicate the time for the relay to be closed, and the blue light is off to indicate the time for the relay to be disconnected. Short press K1, you can enter the fine adjustment settings of the function, the trigger is invalid during the default delay period, press K1 once, the trigger is valid during the delay period (re-timing), and press again to repeat the default first setting.

  

P1-3 working mode: ON for X seconds, OFF for Y seconds, infinite loop. The user can set the time 1X, Y for the relay to pull in; the time setting is similar to P1-2. Short press K1, you can enter the fine adjustment settings of the function, first turn on X, turn off Y seconds, press K1, first turn off X, turn on Y seconds, then press again to repeat the default first setting.


P1-4 working mode: the signal triggers the relay to pull in but does not start the timing, the trigger signal disappears and starts timing T, when the time is up, the relay is disconnected; during the delay period, the signal is given again, the delay is canceled, the pull-in is maintained, the signal disappears, Restart timing; (equivalent to start timing when the button is released, ofte used for power-off delay). The user can set the time T for the relay to pull in; the time setting is similar to P1-1.



Package Include:


ÒÇÉType 1ÒÇæ:1├ùRelay Module(without shell)

ÒÇÉType 2ÒÇæ:1├ùRelay Module(with shell)