Showing 1–10 of 25 results
Features: This is a new generation of software defined radio receiver RTL-SDR with RTL2832 ADC chip, 1 PPM TCXO, SMA F connector and aluminum case with passive cooling. Music from 25 MHz to 1760 MHz bandwidth. Perfect for using as a radio scanner with free computer based software such as SDR, HDSDR, SDR-Radio, Linrad, GQRX…
WHAT IS SOFTWARE DEFINED RADIO (SDR)? In traditional hardware radios, the mathematical operations required to decode and process radio signals are performed using analogue circuitry. Recently, computers have become powerful enough to perform the required mathematical calculations in software, hence the term software defined radio. This has led to advanced radios that previously required…
Feature: Driver-free, support XP WIN7, WIN8, WIN10, 32 or 64 bit system. 1. Output frequency range: ADF4351: 35M-4.4G/ADF4350: 138M-4.4G 2. Power supply mode: DC002 interface DC4-9V typical 5V power supply 3. Refer to the ADI official evaluation board line and layout 4. Output signal: 2.2-4.4G fundamental wave (sine wave), 35M-2.2G fundamental frequency division (square…
Specification: 3.3V or 5V TTL voltage (can be set by jumper) Convert TTL logic levels to computer RS232 levels Power supply: 5V, 3.3V, GND (minimum) RX (3.3V or 5V) TX (3.3V or 5V) Mini USB female connection Package includes: 3 x 3.3V/5V to TTL Serial Converter
Feature: – 1 MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – Compatible with GNU Radio, SDR#, and more – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at…
Description: -The official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party firmware is really what you’ll want to use with it since it contains many more decoders and transmit options. -You can fully unleash the power of the Portapack as this comes with Firmware Installed! Progress…
Specifications: – 1 MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – Compatible with GNU Radio, SDR#, and more – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3…
Description: This is a new generation of software defined radio receiver RTL-SDR with RTL2832 ADC chip, 0.5 PPM TCXO, SMA F connector and passively cooled aluminum housing. Music from 25 MHz to 1760 MHz bandwidth. Ideal for use as a radio scanner with free computer-based software such as SDR, HDSDR, SDR-Radio, Linrad, GQRX or SDR…
Feature: Software Defined Radio, SDR is a new type of radio broadcasting communication technology, which is based on a software-defined wireless communication protocol rather than hardwired implementation. Frequency bands, air interface protocols and functions can be upgraded through software downloads and updates, without completely replacing the hardware. The 100KHz-1.7GHz full-band RTL-SDR receiver can be connected…
Description: For HackRF One 1 MHz to 6 GHz SDR Platform Software Defined Radio Development Board Please tear off the protective film before use Package included: 1 x Acrylic shell Note: The product is only included the shell.
No products in the cart.
