/ / / / / Flipsky 2.4G Screen Remote Control VX3 Transmitter for Electric Skateboard Ebike Eboat Compatible with VESC

Flipsky 2.4G Screen Remote Control VX3 Transmitter for Electric Skateboard Ebike Eboat Compatible with VESC

$407,96 & Free Shipping

In Stock!

Free shipping on orders over $50!

  • Done Satisfaction Guaranteed
  • Done No Hassle Refunds
  • Done Secure Payments
SAFE CHECKOUT
SKU: 1860079 Categories: , ,

Description

Description:

Brand:Flipsky

1. Power on and off 

Power on: Press power on/off button for 2 seconds, the screen of the remote lights up FLIPSKY (LOGO) and vibrates, then the remote is successfully powered on.

Power off: In the power on state, press the button for 2 seconds, and the remote screen displays POWER OFF and vibrates, indicating that the remote is off.

In non-cruise mode, the remote will automatically power off in 10 minutes without any operation.

 

2.How to Pairing?

Note: The remote will not work unless it’s paired with the receiver.

(1): The remote power on, long press the setting button for 2 seconds, then the remote comes to parameters setting mode.

(2):Shortly Press Setting button and shift setting options to ‘Pairing’, then press setting button until “Pairing” becomes blinking and then loosing your finger pressing and now the remote will get in Pairing Mode.

(3): Power on the receiver (means power on the skateboard, if the skateboard is on, turn off it, then repower on it), the remote controller will pair with the receiver, and the screen displays ‘Pairing succeeded’, which means the pairing is successful; 

Power on the receiver and then the remote and receiver will be pairing; If the screen shows ‘Pairing succeed’ then pairing succeed.

Reminds: In step 3, if the receiver does not stay on for 10 seconds and turns to blink and the screen keeps blinking status and does not show ‘Pairing succeed’  that means pairing failure and will exit pairing mode. Please re-power on the receiver and keep pairing. If the signal light is blinking, pairing failed, retry from step1-step3.

 

3 Connection Status

(1) R is displayed on the upper left corner of the remote screen, and the signal bar is displayed on the right side of R, and the LED signal light of the receiver is always on, it means that the remote control and the receiver are connected and the communication is normal;

(2) R is not displayed in the upper left corner of the remote screen, and NO signal bar is displayed on the right side of R, and the receiver’s LED signal light flashes, indicating that the remote control and the receiver are NOT connected and CANNOT communicate.

 

4 .Acceleration/ Brake/ Switch speed mode
Pull the throttle backward to speed up, and the throttle progress bar at the bottom of the screen will increase; push the brake forward to brake.

Switch speed mode: High, Medium, Low Speed; Quickly press the setting button to switch the speed mode.
H   High Speed

M   Medium Speed

L   Low Speed

Notes: the remote is default set in H

Reviews

There are no reviews yet.

Be the first to review “Flipsky 2.4G Screen Remote Control VX3 Transmitter for Electric Skateboard Ebike Eboat Compatible with VESC”

Your email address will not be published.