iFlight Protek25 Pusher Analog SucceX-D 20A F4 Whoop AIO V3.2 4S 2.5 Inch FPV Racing Drone BNF w/ 25-600mW VTX FPV Racecm R1 Camera and GoCam
$1.583,96 & Free Shipping
Free shipping on orders over $50!
- Satisfaction Guaranteed
- No Hassle Refunds
- Secure Payments
After our big success with the iFlight ProTek series, we are now happy to announce another member. The ProTek25 Pusher!
Aiming for pilots looking for less weight but great durability, maximum performance but long distance and flight time.
A lot of thought was put into creating the best light pusher style 2.5inch quad on the market.
Cinematic as well as light freestyle is where this rig feels home. Cruising through the smallest gaps, chasing skateboards or just for fun in your backyard.
– Durable aerodynamic PP body and carbon two-piece frame construction
Only 8 screws to detach the main plastic body from the carbon frame, motors and electronics. Quick, easy and cheap repair or customization!
– Reversed Pusher-style design for enhanced thrust and efficiency
Propeller thrust can travel without any disturbance of frame or wires; Increased flight time, less noise and less propwash!
– Powerful XING 1404 motors
Lightweight, efficient and maximum power for it’s size; More than enough thrust for cruising and acromode flying without restriction!
– Less than 250g weight including 4S 650mAh battery and naked Hero8
Body Size: 76.3*76.3mm
Top plate thickness: 3mm
Top and bottom plate spacing: 21mm (aluminum standoff height)
|SucceX-D Whoop AIO V3.2 FC AIO ESC|
Constant current：20A; 30A（Burst）
|XING 1404 5500KV Motor||Configuration: 9N12P|
Shaft Diameter: 1.5mm
Motor Dimensions(Dia.*Len): Φ18.3×12.5mm
No.of Cells(Lipo): 2-4S
Max Continuous current(A): 11.8A
Max Continuous Power(W): 174.6W
Internal resistance: 0.28Ω
Weight: 8.5g(without cable)
Mounting pattern: 9*9*φ2mm
|Nazgul 2525 propeller||Quantity: 2 CW & 2 CCW|
|SucceX Mini Force VTX||5.8GHz SucceX Mini Micro 600mW VTX|
Antenna interface: MMCX
VTX protocol : IRC Tramp
Output 40 channels.
Mounting pattern: 20*20Φ3/25*25 mmΦ2
|Racecam R1 FPV Camera||Image Sensor: 1/3′ CCD Sensor|
Horizontal Resolution: 600 TVL
TV System: NTSC/PAL (optional)
Synchronization Internal Ratio: 4:3
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio: >60dB (AGC OFF)
Video Output: CVBS
Lens: 2.3mm, FOV 130°
Lens Screw Diameter: M10
Min. Illumination: 0.01Lux F1.2
Auto Gain Control: YES
FLY OSD Voltage/time/horizontal line/title
Camera OSD: YES
DNR: 2 DNR
Connector: Molex PicoBlade 1.25mm 4P
Wide Power Input: DC 5-40V
Work Temperature: -20℃~+60℃
Work Humidity: 20%~80%
Weight: 12g (N.W.)/ (G.W.)
Recommend Lipo Battery ( NOT Included)
iFlight Fullsend 4S 650mAh xt30 ( 3-5mins, for gopro naked; 5-7mins without)
iFlight Fullsend 4S 850mAh xt30 ( 5-7mins, for gopro naked; 6-8mins without)
pre-built and tested Quadcopter
1x iFlight ProTek25 Pusher Frame
1x Racecam R1 FPV Camera
1x GoCam PM GR Sport Camera
1x SucceX Mini Force VTX
1x iFlight ipex/UFL LHCP 5.8g antenna
2x iFlight Nazgul 2525 propeller CW
2x iFlight Nazgul 2525 propeller CCW
1x 15x150mm battery strtap
1x 15x180mm battery strtap