Upgraded 30A 12V/24V Auto Volt/Amp/Temp Display PWM Solar Panel Charge Controller

Upgraded 30A 12V/24V Auto Volt/Amp/Temp Display PWM Solar Panel Charge Controller

$36.99 $31.99

🟢 In Stock

Features: - With Voltage & Current & Temperature Display- Support detection for the Vpmax for the panel, Not just charging voltage.- 32 bit MCU high-speed kernel ARM CORTEX, CPU running speed...

✔️ WORLDWIDE FREE SHIPPING
✔️ 30 DAYS RETURN GUARANTEE
✔️ SECURE CHECKOUT

visamasteramerican expressgoogle paypaypal
Description
Features:
 
- With Voltage & Current & Temperature Display
- Support detection for the Vpmax for the panel, Not just charging voltage.
- 32 bit MCU high-speed kernel ARM CORTEX, CPU running speed 72MHz
- 13 new function LCD menu, Adjustable charging parameters.
- One-click to restore factory Settings, One-click to reboot.
- Fully 3-stage PWM charge management.
- Build-in short-circuit protection,open-circuit protection,reverse protection, Over-the-load protection.
- ST/IR/ Infineon imported dual MOS MOSFET for anti-reverse circuit
- 1oZ copper foil thickness, applicable in -35Ôäâ~60Ôäâ, high-temperature protection.
- Use ±1% high precision resistance, the high-temperature solid-state capacitor on the PCB board with thickness over 2mm. 
- Ultra-low power consumption 12mA@12V.
- Double USB 5V 2A.
 
Applicable Battery Type:
 - B01: lead-acid battery (13.7V)
 - B02: lithium polymer battery (12.6V)
 - B03: lithium iron phosphate battery (14.4V)
 
Specification of 30A Controller:
 
Rated Voltage: 12/24V Auto-Adaptive
Rated Current: 30A
Applicable Pmax & Voc in 12V Solar System: 390W, 15-25V
Applicable Pmax & Voc in 24V Solar System: 780W, 30-50V
Equalization: 14.4V
Float charge: 13.7V (defaul,adjustable)
Discharge stop: 10.7V(defaul,adjustable)
Discharge reconnect: 12.6V(defaul,adjustable)
Charge reconnect: 13V
Voltage of open light: Solar panel 8V(Light lights delay)
Voltage of close light: Solar panel 8V(Light off delay)
USB output: 2 way USB output,5V/2A(Max.)
Self-consume: <12mA
Operationg temperature: -35-60Ôäâ
Size: 132mmx70mmx32mm
 
About the Charging & Dis-Charging Current Display:
 - The controller is mainly designed for the high current solar system, The current may not display in 3 situations: Low-wattage panel, Weak sunlight, Low-wattage appliance.
 - The display is more accurate when the current is higher (>1A).
 
About the Temperature Display:
 Charging will stop at >80Ôäâ
 Charging will restart at <70Ôäâ
 
System connection:
 1. Connect the battery to the charge regulator-plus and minus.
 2. Connect the photovoltaic module to the regulator-plus and minus.
 3. Connect the consumer to the charge regulator-plus and minus.
 
Package included:
 
1 x PWM Solar Charge Controller 30A
1 x User Manual