Type-C PD QC AFC Fast Charge Decoy Trigger Module DC 5V 9V 12V 15V 20V Output Charger WIFI Router Smart Speaker Camera

Type-C PD QC AFC Fast Charge Decoy Trigger Module DC 5V 9V 12V 15V 20V Output Charger WIFI Router Smart Speaker Camera


Type: A Standard

A Standard
A with Terminal
A with USB
B Standard
B with Terminal
B with USB

🟢 In Stock

Feature:DIP switch to select voltage output module (QCTCAJTA):1. Fast charging support protocol: PD2.0/PD3.0.QC2.0/QC3.0.AFC.FCP2. Module support voltage: 5V/9V/12V/15V/20V (requires charger support)3. Voltage adjustment method: According to the table on the back...


visamasteramerican expressgoogle paypaypal

DIP switch to select voltage output module (QCTCAJTA):
1. Fast charging support protocol: PD2.0/PD3.0.QC2.0/QC3.0.AFC.FCP
2. Module support voltage: 5V/9V/12V/15V/20V (requires charger support)
3. Voltage adjustment method: According to the table on the back of the board, adjust the DIP switch to control the voltage output. Notes:
1 After the DIP switch is adjusted, because there is no voltage indication, it is recommended to use a multimeter to measure the voltage before connecting to the application circuit.
2 If the DIP switch is not adjusted according to the table, the module will output a voltage supported by the module at will.
3 Whether it can output these voltages (5V 9V 12V 15V 20V) is determined by your charger.
Dimensions: 30mm X 20mm X 10mm
Weight: 3g (standard), 4.6g (with terminal), 4.4g (with USB)


1. Fast charge support protocol: support PD3 0.PD2. 0. QC, FCP, AFC voltage decoy output, free mode switching can also be set, only supports PD.
2. Support 5V/9V/12V/15V/20V decoy output (the specific range is related to your power supply).
3. It has the function of key lock to prevent misoperation (to avoid wrongly setting the voltage to damage the load equipment).
4.5V/9V/12V/15V/20V quick setting. LEDs indicate output.
5. The parameters are automatically saved, and the last spoofing setting will be executed after powering on again.
6. Ultra-low power consumption, high current, support 100W output.
7. Maximum 20V/2A output (actual value depends on your power supply).
8. Type-C integrated molding, durable.
9. Suitable for aging test, the module withstand voltage is more than 30V.
10. Each voltage can be quickly switched by external buttons


1. PD only short contact: After short contact, the module only supports PD protocol.
2. DM and DP short contact points: DM and DP can be output from USB after short circuit. Shorting is not recommended unless necessary.
3.5 Independent button short contact: It can be connected to five independent buttons to quickly switch the voltage, which can be short circuit, short press, and long press (the grounding of these five short contacts on the module circuit is connected together).
4. S1 short contact: This is the key lock function. After shorting, the switch voltage needs to be unlocked. The unlock method is to long press the button to power on. To reboot, you need to unlock it again.


1. The power supply must support PD or QC protocol.
2. Before use, please confirm whether the output voltage is consistent with the power consumption voltage of the electrical equipment used, so as to avoid misoperation and burn the equipment, otherwise the consequences will be at your own risk.
3. Try to hold the edge of the board with your hands, do not touch the chip directly, so as to avoid damage to the chip by human static electricity.
4. When the output voltage of the bait is unknown, do not connect the load first, and then connect it after confirmation, so as to avoid the voltage exceeding the withstand voltage of the load.
5. The reason for the voltage jump (the indicator light is flashing): If the no-load output of the bait is normal, there is a load that has a voltage jump (the voltage has just risen back to 5V or simply disconnected). In this case, the load power exceeds what the power supply can provide. At this time, the power supply will be forced to drop or power off protection. At this time, you can only change to a higher power supply or reduce the power of the load.

Package includes:

1 x Fast Charge Decoy Trigger Module