SpeedyBee Flex25 Analog 78mm F7 35A AIO 4S 2.5 Inch CineWhoop FPV Racing Drone with 800mW VTX RunCam Phoenix2 Nano Support Runcam Thumb Pro Plug and Play

Gyro: MPU6000

OSD: AT7456E

Support 3-6S Lipo

Mounting Hole: 25.5x25.5mm

Con. Current: 35A

Firmware: BLHeli_S

FC: Wireless firmware flashing , full Betaflight configuration  

ESC: Wireless firmware flashing , full BLHeli_S configuration  

Change motor directions wirelessly 

4 UARTS , Barometer , I2C pads , 8MB Blackbox flash

KV: 4500KV
Input Voltage: 3-4S
Shaft Diameter: 1.5mm
Motor Dimension: 19.3x15.6mm (DiaxLen)

Mounting Hole: M2x9 , M2x5
Weight: 9.6g
Idle Current:  0.5A 8V                                     
Max. Power:  250W 6S
Max. Current: 14.8A

Frequency: 5.8GHz 48CH 

Output Power: PIT/25/200/400/800mW 

Working Current: 250-750mA 5V

Voltage out: max 250mA 5V

Voltage In: 3.7-5.5V  

Video input impedance: 75 Ohm 

Antenna Connector: MMCX

Weight: 5.6g without antenna  

PCB Size: 28x28mm

Mounting Hole: 20x20mm

Model: Speedy Bee 5.8 GHz Antenna V2

Frequency range: 5.5-6.0 GHz 

Gain: 2.8dBi  

Polarization: RHCP

Image Sensor: 1/2 CMOS Sensor 

Horizontal Resolution: 1000TVL  

Lens: 2.1mm M8 ; FOV155 4:3

Screen Format: 4:3 / 16:9 switchable

Signal System: PAL / NTSC Switchable 

Power: DC 5-36V 

Dimensions: 14x14x22mm

Recommend Battery (NOT Included)

Recommend 4S 450-750mAh LiPo

Flight Time: around 8mins (Test with 4S 850mAh Lipo ,total flight time depends on flying style, throttle position.)