DALY BMS DL13S 13S 48V BMS Battery Protection Board 15A 20A 30A 40A 50A 60A Waterproof BMS for Rechargeable Lifepo4 Electric Charge Li Lipo NiCoMn ion Cells with Balance

Model: DL13S (3.7V rated Li-ION Battery not for 3.2V Rated LiFePO4)

common Version : common port for charge/discharge 

separate Version : separate port for charge/discharge

We can customize any PCB from 1S to 30S lithium batteries with different current.(Quantity´╝Ş10)

 Highlight´╝ÜFor the same model, its charge current is less than discharge current.

ÔùåDL13S48V15A/20A/30A/40A/50A/60A bms is used for 13 series 48V battery pack.

ÔùåWe can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.

ÔùåThe main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection etc.

ÔùåAccording to the customer request we can develop PCM in different sizes and structures.

ÔùåBMS manufactured by  high quality Mos and IC imported . Keep your battery long cycle serivce life time.

 

ÔùåUse top quality (A-level) protective integrated circuit IC

ÔùåStrong load ability, constant discharge current 15A/20A/30A/40A/50A/60A , use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.

ÔùåIC itself has power balancing function. The circuit is simple and reliable.

ÔùåTypical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load wonÔÇÖt affect the PCB and the battery.Temperature protection during charging and discharging.

ÔùåExtreme low power consumption. The consumption of the whole device is less than 50uA.

ÔùåPCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.

1 x DL13S 13S 48V BMS Battery Protection Board