AC110V-220V Digital Display Time Relay Automation Delay Timer Control Switch Relay Module

AC110V-220V Digital Display Time Relay Automation Delay Timer Control Switch Relay Module

$21.20 $17.69

Specifications: Timing range: 0-999s 0-999m 0-999hSupply voltage: AC110V-220VRelay:20AWorking current:10A(max)Power:500W(max)Size :79*26*43mmHole size:72*40mm Instructions: Please pay attention for your first use. You need wait 6s after your setting data, the module will save the date...

🟢 In Stock

✔️ WORLDWIDE SHIPPING
✔️ 30 DAYS RETURN GUARANTEE
✔️ SECURE CHECKOUT

visamasteramerican expressgoogle paypaypal
Tags: shop
Description
Specifications:
 
Timing range: 0-999s 0-999m 0-999h
Supply voltage: AC110V-220V
Relay:20A
Working current:10A(max)
Power:500W(max)
Size :79*26*43mm
Hole size:72*40mm
 
Instructions:
 
Please pay attention for your first use. You need wait 6s after your setting data, the module will save the date you have set after 6s.  
Short press button SET: If you start the time setting mode , Nixie tube will blink. You could adjust the time T1 and T2 by button+ and button-. Please wait 5s after your setting date, the module will save the date you have set after 5s .
 
Long press button SET: if you start the parameter setting mode. There are two group parameter for your choice  : P0 and P1. You could switch P0 or P1 by short press SET. Under the parameter P0 and P1,you could set the timing mode by the button+ and button-.
 
P0--0: Timing time mode : 0---999s.
P0--1: Timing time mode : 0---999min.
P0--2: Timing time mode : 0---999h.
P1--0: The relay will connect after you delay the T1 time .
P1--1: The relay will disconnect after you delay the T1 time.
P1--2: The relay will connect after you delay the T1 time first, Then the relay will disconnect after you delay the T2 time , it finish.
P1--3: The relay will disconnect after you delay the T1 time first, Then the relay will connect after you delay the T2 time , it finish.
P1--4: The relay will connect after you delay the T1 time  first, Then the relay will disconnect after you delay the T2 time , it is cyclic.
P1--5: The relay will disconnect after you delay the T1 time first, Then the relay will connect after you delay the T2 time , it cyclic.
Example: A customer needs 10 seconds to start up and 20 seconds off. Setup is as follows:
T1 set time 10, T2 set time 20
P0 -- 0 (T1 time range is seconds)
P1--5 (timer work mode)
 
Package Included:
 
1 x Digital Display Time Relay