23.5g Happymodel Mobula6 HDZero 65mm 1S SuperbeeF4 Lite Whoop FPV Racing Drone w/ HDZero Whoop Lite VTX HDZero Nano Lite Camera

23.5g Happymodel Mobula6 HDZero 65mm 1S SuperbeeF4 Lite Whoop FPV Racing Drone w/ HDZero Whoop Lite VTX HDZero Nano Lite Camera

$229.99

Receiver: 2.4GHz ELRS SPI

2.4GHz ELRS SPI
Compatible Frsky SPI D8/D16 Receiver

Introduction:Introducing Mobula6 HDZero, the very first 65mm HD brushless whoop in the World, weights less than 23.5 grams only!We have been working on innovations of Brushless Whoop for a few years. Just like many of you, we are particularly eager to have a 65mm FPV whoop carrying HD VTX. Teaming with HDZero, Runcam, Nick Burns, Mr Shutterbug, Ryan Quellet and many other enthusiasts, here the dream comes true finally!Specification:Brand: HappymodelModel: Mobula6 HDZeroFrame wheelbase: 65mmWeight: 23.5 gram without batterySize: 80mm*80mm*50mmReceiver option:SPI ELRS 2.4GHzSPI FRSKY 2.4GHzCompatible with 1S Lipo battery or Lihv battery PH2.0 Plug ( NOT Included) Flight controllerSuperbeeF4 Lite ELRS/FRSKY SPI ELRS version Firmware target: CrazybeeF4SX1280SPI FRSKY version Firmware target: CrazybeeF4FRMCU:STM32F411CEU6 (100MHz, 512K FLASH)Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 readyBuilt-in Betaflight OSD(SPI Control)Built-in SPI Frsky/ExpressLRS receiverBuilt-in 5V 1A BECBuilt-in voltage detection Onboard 4in1 ESC MCU upgraded to EFM8BB21Power supply: 1S LiPo/LiPo HV (2.8v~4.35v)Currents: 5A continuous peak 6A (5 seconds)Support BLHeliSuite programmableFactory firmware:...

🟢 In Stock

✔️ WORLDWIDE SHIPPING
✔️ 30 DAYS RETURN GUARANTEE
✔️ SECURE CHECKOUT

visamasteramerican expressgoogle paypaypal
Tags: shop
Description

Introduction:

Introducing Mobula6 HDZero, the very first 65mm HD brushless whoop in the World, weights less than 23.5 grams only!

We have been working on innovations of Brushless Whoop for a few years. Just like many of you, we are particularly eager to have a 65mm FPV whoop carrying HD VTX. Teaming with HDZero, Runcam, Nick Burns, Mr Shutterbug, Ryan Quellet and many other enthusiasts, here the dream comes true finally!


Specification:

Brand: Happymodel

Model: Mobula6 HDZero

Frame wheelbase: 65mm
Weight: 23.5 gram without battery
Size: 80mm*80mm*50mm
Receiver option:
SPI ELRS 2.4GHz
SPI FRSKY 2.4GHz
Compatible with 1S Lipo battery or Lihv battery PH2.0 Plug ( NOT Included)


Flight controller
SuperbeeF4 Lite ELRS/FRSKY
SPI ELRS version Firmware target: CrazybeeF4SX1280
SPI FRSKY version Firmware target: CrazybeeF4FR

MCU:STM32F411CEU6 (100MHz, 512K FLASH)
Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)
Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in SPI Frsky/ExpressLRS receiver
Built-in 5V 1A BEC
Built-in voltage detection
Onboard 4in1 ESC

MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV (2.8v~4.35v)
Currents: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT150/DSHOT300/DSHOT600

Onboard SPI ExpressLRS 2.4GHz RX

( ELRS 2.4G Version)

Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz

Antenna plug: IPEX
Telemetry output Power: <12dBm

Receiver protocol:  SPI ExpressLRS

Could bind with ELRS V2.0 firmware TX module

Onboard Frsky SPI D8 /D16 2.4GHz RX

( Frsky Receiver Version)

SPI BUS receiver Frsky D8/D16 compatible
Compatible Non EU transmitter D8 model and EU-LBT(Frsky_x_lbt)
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
Based on CC2500 RF module Compatible with Futaba S-FHSS , Redpine protocol 
Motor

Mode: EX0802 19000KV
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:╬Ğ1mm
Motor Dimension(Dia.*Len):╬Ğ10.5mm*14.9mm
Weight(g):1.7g
No.of Cells(Lipo):1S only

 Gemfan 1219 Bi-blades Propeller

Weight:0.19g
Material: PC
Pitch:1 inch

Props Dia:30mm
Center Hole Dia:1mm

HDZero Nano Lite Camera 

Dimension: 14x16x11mm

Weight: 1.5gram

0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor

Excellent low light performance

Fov:

4:3: D:130┬░ H:108┬░ v:84┬░

16:9:D:122┬░ H:108┬░ V:65┬░

HDZero Whoop Lite VTX

1S Input

25mW/200mW RF Output-SmartAudio Support

25.5x25.5 M2 Soft Mounting- Antenna Retention

Removable Shielding Box- 32.5x32.5mm(29x29mm inner)

4.5grams/4mm Thickness (without shielding)



Package Included:

1x Happymodel Mobula6 HDZero FPV Drone

1x Spare Canopy

1x Screw driver

1x Propeller disassemble tool