Note: The first use of Smart BMS requires charging activation before it can be used. For the operation steps, please refer to 'Connect and Activate Video' in the following document.
1. Customer need to identify the battery's series, then choose the same series BMS. Such as your battery is 24S, you must choose 24S BMS, can not choose 20 or other one. The number of series of BMS is fixed ,not adjustable once the BMS is shipped out .
2. The first time the smart BMS is used, it needs to be charged and activated.
3. BMS touch control screen and Bluetooth module can not be used at the same time, choose one of the two, the same interface.
4. All accessories and BMS are the latest version, maybe the picture has not been updated, if you are concerned about the version, please consult the specific situation before purchasing.
Daly 18650 smart BMS 20S 72V 80A 100A 120A Bluetooth 485 to USB device NTC UART software togther Lion LiFepo4 Battery BMS
Currently, all Smart BMS without the waterproof function.
This link is for 20S72V Li ion Battery.
Ôùå UART: It is Daly normal product. UART is Universal Asynchronous Receiver/Transmitter, It transforms the data to be transmitted between serial communication and parallel communication. As a chip to convert parallel input signals into serial output signals, UART is usually integrated into other communication interfaces.
Ôùå RS485: Please choose the model RS485 of Daly. RS-485 adopts balanced transmission and differential reception, so it has the ability to suppress common mode interference.
Ôùå Bluetooth module : if you need this function, Please choose bluetooth module, if you do not buy it, we will not send it to you.
DL20S 72V Smart BMS 80A 100A 120A bms can be used to 17S Li ion or LiFePO4 or LTO battery pack. Customer can adjust the paramter of overcharge or overdischarge the parameter sitting & other parameter if customer need to use which type battery for the same series battery.
ÔùåControl instructions: remote control device monitoring.
ÔùåVehicle icon: data transmission send command
ÔùåStatistical report: Collect the data information, the customer can monitor the battery capacity & other alarm infomation.
ÔùåElectronic fence: fence setting limit range.
ÔùåDevice information: device parameter information, etc.
(Choose different BMS specifications according to your needs:)
BMS Board :
1 x BMS Board
1 x Cable (Use to connect battery)
1 x NTC Module
Below accessary need you to buy separately:
1 x USB to UART Cable 6P(optional)
1 x USB to RS485 Cable(optional)
1 x Power display panel (optional)
1 x Bluetooth module (optional)
1 x UART touch control screen(optional)
1 x USB to CAN box(optional)
If you need more BMS accessories information, you can click here to open >>>ID: 1872195 <<<
The information on your battery can be checked on your host computer, then you can monitor your battery status anytime. Which is easly control your device. Smart BMS make our life to become easy.