Model: DL12S (3.2V Rated LiFePO4 battery bms not for 3.7V rated Li-ION Battery bms)
common Version : common port for charge/discharge
separate Version : separate port for charge/discharge
We can customize any PCB from 1S to 30S lithium batteries with different current.
Highlight´╝ÜFor the same model, its charge current is less than discharge current because Daly PCBAs were updated to well protect customer battery.
Any request, Please contact us. (QuantityÔëÑ10)
ÔùåDL12S 36V 15A 20A 30A 40A 50A 60A PCB is used for 12 series 36V LiFePO4 battery pack.
ÔùåWe can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.
ÔùåThe main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection etc.
ÔùåAccording to the customer request we can develop PCM in different sizes and structures.
ÔùåBMS manufactured by high quality Mos and IC imported . Keep your battery long cycle serivce life time.
ÔùåUse top quality (A-level) protective integrated circuit IC
ÔùåStrong load ability, constant discharge current 15A 20A 30A 40A 50A 60A, use high voltage resistance, low inner
resistance power Mosfet. The heat sink will greatly help cooling.
ÔùåIC itself has power balancing function. The circuit is simple and reliable.
ÔùåTypical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection
function is very reliable.Long time short circuit of the load wonÔÇÖt affect the PCB and the battery.Temperature protection during charging and discharging.
ÔùåExtreme low power consumption. The consumption of the whole device is less than 50uA.
ÔùåPCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.
1 x Daly 12S 36V 15A 20A 30A 40A 50A 60A Waterproof BMS