-17%

Heltec STM32L151CBU6 Development Board LoRaWAN Low Power IoT Node CP2102 USB to Serial Port SX1278 Module

$349.90 $289.90

Tax included.

Heltec LoRa Node Products Difference Table:ÔÇ£Heltec LoRaÔÇØ product family already included follow options: LoRa spread spectrum communication (node);Battery powered;Good RF circuit design and impedance matching. Product TypeÔæá MCU FLASH Battery Battery Detect...

Out of stock

mastervisaamerican express
SKU: 1639289N/A
Heltec LoRa Node Products Difference Table:

ÔÇ£Heltec LoRaÔÇØ product family already included follow options:
 
LoRa spread spectrum communication (node);
Battery powered;
Good RF circuit design and impedance matching.

Product TypeÔæá MCU FLASH Battery Battery Detect VextÔæó Low PowerÔæú Display
WiFi LoRa 32 Dev-Board ESP32 4MB LithiumÔæí x x x OLED (128x64)
WiFi LoRa 32(V2)
(Product ID: 1639291)
Dev-Board ESP32 8MB Lithiumメ   800uA OLED (128x64)
Wireless Stick
(Product ID: 1639290)
Dev-Board ESP32 8MB Lithiumメ   800uA OLED (64x32)
Wireless Stick Lite
(Product ID: 1638098)
Dev-Board ESP32-PICO 4MB Lithiumメ   35uA x
Wireless Shell
(Product ID: 1638101)
Module ESP32-PICO 4MB   x 10uA x
LoRa Kit 151
(This item)
Dev-Board STM32L151CBU6 128kB Lithium x x 7uA x
LoRa Node 151
 (Product ID: 1638100)
Dev-Board STM32L151CCU6 256kB 1/2 AA Lithium chlorine sulfite battery   1.8uA x
Turtle Board
(Product ID: 1638099)
Dev-Board STM32L432KC 256kB AAA x 2   5uA x

Notes:
 
Ôæá ÔÇô Type:
Dev-Board ÔÇô Can be used directly;
Module ÔÇô Only core function, need to cooperate with external PCB or circuit.
Ôæí ÔÇô Lithium: All lithium battery socket for Heltec boards is SH1.25-2;
Ôæó ÔÇô Vext: 3.3V(500mA) output, for external devices (e.g. sensors) power supply, in deep sleep mode, Vext can be shut down via software;
Ôæú ÔÇô Low Power: ProductsÔÇÖ low power design, of Whole Circuit, the measured data are the current of the system during deep sleep.

Feature:

-In order to meet the userÔÇÖs requirements for Ultra-Low-Power and standard LoRaWAN protocol, we designed this product. On the basis of STM32L151CBU6MCU and SX1278 LoRa chip(433, 470MHz), the low power current can reach to 6uA.

-CE Certificate;
-Microprocessor: STM32L151CBU6 (Ultra-low-power ARM Cortex-M3 MCU with 128 Kbytes Flash), with LoRa node chip SX1278 (433MHz ~ 510MHz);
-Micro USB interface with a complete voltage regulator, ESD protection, short circuit protection, and other protection measures;
-Onboard SH1.25-2 battery interface, integrated lithium battery interface, integrated battery management system (battery power detection, USB / battery power automatic switching);
-Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing;
-This product supports DFU mode download (need to cooperate with relevant download software).
-System resource: FLASH ÔÇô 128K,  RAM ÔÇô 16K,  EEPROM ÔÇô 4K;
-User available resources: FLASH ÔÇô 64K, RAM ÔÇô 8K, EEPROM ÔÇô 4K;
-Provide standard LoRaWAN protocol routines.
-With good RF circuit design and basic low-power design (sleep current Ôëñ7uA), it is convenient for IoT application vendors to quickly verify
-LoRaWAN protocol easily.

Source Parameter
MCU STM32L151CBU6 (Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3)
LoRa chip SX1278
LoRa bands EU_433, CN_470_510,two bands optional
LoRa maximum output power 18dB ┬▒ 1dB
Hardware Resource USART x 3; SPI x 2; I2C x 2; ; USB 2.0 x 1
12 ÔÇô bits ADC; 12 ÔÇô bits DAC
DMA controller
28 general GPIO
Flash 128KB FLASH;16KB SRAM;4KB EEPROM;80B BACKUP REGISTER
Interface Micro USB x 1; LoRa antenna(IPEX) x 1
length x width x height(pin) 57 x 27 x 7(14) mm
Battery type Lithium
Low power design Deep Sleep: 6uA
Electrical characteristics Condition Minimum Typical Maximum
Power Supply USB powered(ÔëÑ500mA) 4.7V 5V 6V 
Lithium powered(ÔëÑ250mA) 3.3V 3.6V 4.2V
3.3V(pin)powered(150mA) 2.7V 3.3V 3.5V
5V(pin)powered(500mA) 4.7V 5V 6V
Power consumption(mA) LoRa 10dB emission   50mA  
LoRa 12dB emission   60mA  
LoRa 15dB emission   110mA  
LoRa 20dB emission   130mA  
Output 3.3V pin output     500mA
5V pin output (USB powered only)   Equal to the input current  
External device power control (Vext 3.3V)     350mA

Package includes:

1 x STM32L151CBU6 Development Board


LoRa Kit 151 Example Code:
LoRa Kit 151 Pingpang test example code (need two LoRa Kit 151 to test): https://heltec.org/wp-content/uploads/2019/07/Kit_151_PingPang.zip
 
LoRa Kit 151 Schematic diagram:
 
Summary of Common Problems:
 




















Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

Heltec STM32L151CBU6 Development Board LoRaWAN Low Power IoT Node CP2102 USB to Serial Port SX1278 Module

$349.90 $289.90